Three-dimensional transparent film packaging machine is a relatively popular equipment on the market. It is an integrated product of machine, electricity and gas. The use of this mechanical equipment on the market packaging more common products such as poker! The product packaging of the equipment is bright and beautiful, can be anti-counterfeit, firmly sealed, improve the number of clogging of the product, moisture-proof, good sealing, convenient opening. The equipment is widely used in craft gifts, medicine and health products, food, cosmetics and other manufacturing industries of various small and medium-sized packaging boxes of single transparent film 3D automatic packaging. After the control system is started, the servo controls the film feeding, and the cylinder automatically completes the packaging actions such as pushing, cutting film, blowing, folding, folding up, folding down, etc., which is mainly used for the outer packaging of various cartons.

When the 3D transparent film packaging machine system automatically runs in the default mode, it will first automatically detect and confirm whether each cylinder is in the reset state. If it is not in the reset state, the system alarms and each cylinder is launched at the same time. Restart; When the system switches from automatic operation to manual operation or at the same time, all cylinders will automatically reset (that is, tilt, push, shape, pull, fold, fold, cut, blow reset to the initial state).

In order to maintain the normal state of air pressure, when the air pressure is insufficient, the system will prompt the user to inform the system that the air pressure is insufficient and the system will not start. The entire system is provided with two emergency switches, in the event of an accident, pressing the emergency stop button will stop all systems and prohibit all operations. After the fault is rectified, restore the emergency stop button and perform operations again. The 3D transparent film packaging machine can be manually sent out or connected with the front-end packaging machine and the back-end packaging machine to form an automatic packaging production line. This greatly improves the packaging efficiency, reduces the packaging cost of enterprises, improves the grade of enterprise products, thus improving the market competitiveness of products, and greatly improves the added value of products. This machine is to replace the traditional heat shrink packaging, is a better choice for modern collection packaging. The packing material is BOPP film, thermo-adhesive cellophane and anti-counterfeiting gold wire.

If you want to make the transparent 3D packaging machine more perfect, you can check the equipment regularly, check once a month, keep the room clean and tidy, and do not let the corrosive gases contained in the atmosphere such as acid into it. If damage is found, it should be repaired in time. Do not let the transparent film packaging machine work again. The whole machine must be kept clean and tidy, and coated with lubricating oil to prevent rust. Cover with cloth when not in use.

The above is a summary of some knowledge about the operation and maintenance of transparent film three-dimensional packaging machine, I hope to help you here, if you are not very clear about the daily attention to mechanical equipment and maintenance problems, you can also go to our smart website FAQ reference solutions to related problems, if you do not understand the place, Welcome to contact our company.