3D transparent film packaging machine How much? For people who have just started to contact this machine and equipment, the price of this machine is unpredictable, it will inevitably be messy, there are many concerns, which is also a lot of customers are concerned about. If the price is high, it will inevitably exceed its budget. If the price is low, it is afraid that the quality of the product is not guaranteed, so it is in a dilemma.

In fact, the price of three-dimensional transparent film packaging machine is different. Each manufacturer's product positioning, product quality, product type configuration and so on are not the same. Therefore, due to various reasons, the price difference is also very large. A price of goods, all in all, expensive is not necessarily good, cheap is not necessarily poor quality, or we need to refer to the comparison. Three-dimensional transparent film packaging machine in the process of use, more or less there will be some failures, some problems are fatal, serious may lead to the machine directly scrapped. Small problems are relatively easy to deal with, so what problems do we often encounter in the process of use? How are these problems solved? Let's take a look.

This problem may occur in a single box, not in all boxes. This is because the rest of the parts on the tool are dull or the positions between the tools are not correct, resulting in complete cutting. A complete break creates tension, breaking the film and causing the film position to shift, which requires re-grinding the tool or adjusting the position of the top line on the back of the tool so that there is no gap between the tools and the film is immediately cut directly.

Three-dimensional transparent film packaging machine is through the rubber roller and the knife base optical axis friction rotation, the film will be pulled down. Because the gap between the roller and the optical axis pulls the film down, the film is cut short. It is necessary to adjust the roller. Tighten the fixing screws on the left and right sides of the rubber roller further along the direction of the optical axis, so that the rubber roller is in close contact with the optical axis, so that the length of the lower film is normal.

For the three-dimensional transparent film packaging machine, its main functions include: on the basis of ensuring the quality of the packaging machine, to minimize the manufacturing cost and production process preparation cost of the packaging machine, so that the equipment has an advantage in price and improves market competitiveness.

The technical documents of the equipment can reflect the technical requirements and design ideas of the production, so as to avoid the loss of low quality caused by incomplete drawing design. Therefore, pay attention to the quality of equipment technical documents.

Depending on the material, the cost of the packaging machine is about 70%. Determined by design, the proportion of design work cost is much lower than manufacturing cost; The second is to design products that meet the technical objectives while ensuring the nature of the packaging machine. In order to meet user needs, in the process of use, Chuangqi Intelligent Equipment Co., Ltd. reminds you to pay attention to the following aspects:

In the daily maintenance of the equipment, attention must be paid to the protection of the surface of the three-dimensional transparent film packaging machine every three months; The surface needs to be treated daily to avoid dust. The correct use of 3D packaging machine is necessary to avoid unnecessary trouble and ensure the safe and normal operation of the equipment. Users need to be familiar with the structure, performance, working principle and operation points of the three-dimensional transparent film packaging machine. The mechanical and electrical department is responsible for the installation and debugging of the sealing machine, timely organizing personnel to carry out overhaul and eliminate equipment faults. The workshop supervisor is responsible for supervising the proper and reasonable use of the sealer and daily maintenance. Do not put your hand on the hot cloth while working, in case of injury. When you're done, organize and put away the things you don't need.